Frequently Asked Questions
Decal Application Instructions
Headlight Eyebrow Application
3rd Brake Light Overlay Application
Large Body Graphic Installation
Helmet Decal Application
XBOX Skin Application Instructions
iPod Mini Skin Application Instructions
iPod 4th & 3rd Gen Skin Application Video
iPod Nano & 5th Gen Skin Application Instructions
Nintendo DS Skin Application Instructions
Brake Caliper Decal Instructions
Eyebrow Application Instructions:
(Note: We recommend a surface temperature of 55 degrees or more for decal applications)
Clean headlight lens surface well. Remove all wax, dirt, etc.
Create a soapy water solution and spray it on the surface thoroughly. I used dish soap, but anything should work fine.
Carefully pull the eyebrow off the paper backing, then place on the headlight surface. Slide it around until it is positioned just right.
Use a squeegee to pull the soapy water out from under the vinyl. Keep working the surface until there are no bubbles or wrinkles.
If you have any excess vinyl you can tuck it in to the rubber seal around the headlight or trim it off with a razor.
Allow for plenty of dry time. Let it sit in the hot sun or use a blow dryer to speed up the process.
Subscribe to our Newsletter and get up to
date with the latest products and promotions.