Vinz Decals Custom Made Vehicle Graphics

Color Chart Large Body Graphics - Small Prices!
Guides:
Frequently Asked Questions
Decal Application Instructions
Headlight Eyebrow Application
3rd Brake Light Overlay Application
Large Body Graphic Installation
Helmet Decal Application
XBOX Skin Application Instructions
iPod Mini Skin Application Instructions
iPod 4th & 3rd Gen Skin Application Video
iPod Nano & 5th Gen Skin Application Instructions
Nintendo DS Skin Application Instructions
Brake Caliper Decal Instructions


Nintendo DS Skin Application Instructions:

Clean your Nintendo DS, make sure it is completely free of any particles. Then start with the top piece. The easiest way to apply this is to line up the oval opening with the Nintendo Logo. Using both hands, gently lay the skin to the surface. Let the middle of the skin touch first.

Start rubbing up and down from the middle and work your way out to the edges, one side at a time.

Next lay the back piece over the rear of the DS. It is easiest to line this piece up with the hinges. Once it is lined up, press the skin down in the middle and work your way to the edges.

Now apply the long strips along the edges of the DS. Starting with the top one, gently lay it on the surface.

Press down in the middle and work around the corners to the ends of the strip. We have designed these strips with such a precise angle that they conform perfectly around the edges.

Now do the same for the lower strip. Take your time and line it up along the angles of the cartridge slot. Always start from the middle.

A lot of work went into the design of these skins. We always take the time to include as many pieces as we can with our skin sets.

Open up the unit and double check that you cleaned the inside of the DS. Now line up the piece that goes around the bottom screen. Line it up with the edges of the screen and gently lay it to the surface. Start rubbing from the center and work your way to the ends.

Next move on to the controller surroundings. Take your time to line them up properly before pressing down.

Now align the top screen skin with the two small square nubs near the top. Line it up with these and the rest should fall into place.

Start pressing down from the middle and work your way to the edges. That is it. You are done.




Subscribe to our Newsletter and get up to
date with the latest products and promotions.

Email Address: